Important Instructions; Technical Data - Enozo SB-100 Mode D'emploi

1.4

IMPORTANT INSTRUCTIONS

NOTICE
!
Appliance damage!
Do not drop the bottle.
- Dropping the bottle may cause breakage.
Fill with clean potable water only.
- Filling the bottle with fluids other than clean potable water may damage cartridge and render the product
useless.
Do not overfill the bottle.
- Overfilling may cause leakage at the fill plug.
Do not run water into the charger port.
- Doing so may short the battery/electronics .
2
SPECIFICATIONS SB-100
Materials
Weight (empty)
Dimensions in (mm)
Reservoir Capacity
Water Temperature
Water Quality
Ambient Air
Rechargable Battery
Useful Battery life
Model Number
Certifications
EPA Establishment
Number
All manuals and user guides at all-guides.com

TECHNICAL DATA

PC/ABS Impact Resistant Plastic
~ 2lb (0.9 kg)
4 in x 4 in x 10 in (100 mm x 100 mm x 250 mm)
14 oz (400 ml)
40 °F to 86 °F (4 °C to 30 °C)
Hardness ≤ 250 ppm CaCO3 (May Extend Life of Unit)
Conductivity >50 μS/cm (Cell Damage May Result from use of Distilled or Deionized Water)
40 °F to 104 °F (4 °C to 40 °C)
7.4 V LiIon (Charger uses 100 V AC to 240 V AC, 50/60 Hz)
5000 Reservoir Fills or 500 Charges (Typical)
SB-100
CE, TUV, RoHS, WEEE
089373-MA-001
en
4