Safety And Warranty - QUNDiS Q Water 5.5 Instructions De Montage

Safety and warranty

All manuals and user guides at all-guides.com
This product must be installed professionally and in accordance with the
en
prescribed assembly guidelines and may therefore only be installed by
qualified and trained experts. DIN 1988 / EN 806 and DIN EN 14154 must
be heeded during installation of the meter.
Suitable measures must be taken to ensure the hygiene requirements for drinking
water for transport, storage and commissioning.
Country-specific standards and directives, particularly drinking water directives,
must be taken into consideration.
Intended use
Water meters are for recording the consumption of drinking water. Depending on
their design, they are for measuring warm or cold water. Water meters must be
used exclusively for this purpose.
Any use other than the use described above and any changes made to the device
constitute improper use. Enquiries regarding other uses and changes must be
made in writing beforehand and are subject to special approval.
Warranty and guarantee
Warranty and guarantee claims are only valid if the parts in question have been
used in accordance with their intended use and if the technical requirements and
any applicable technical regulations have been observed.
Safety Instructions
Improper handling and excessively forceful tightening of screwed connections can
cause leaks. Observe the maximum torque stated in the manual.
The dimensions and thermal loads of seals must be appropriate for their applica-
tion. You should therefore only use the seals delivered with the device.
4 FIM5-00WA-DE3-WME5A 28.09.2016