Hornbach 2.0 100 Montage page 9

FAN DISMOUNTING AND DISPOSAL
Fan 2.0 100
1
Disconnect the fan from power mains prior to any
operations on the device.
DISMOUNTING
1. Remove the screw 7 .
2. Remove the front panel 1.
3. Remove the screw 4 .
4. Remove the cover 2.
5. Disconnect the wires from the terminal block 6
the terminal block from the housing 8.
6. Remove the impeller from the motor shaft 9.
7. Remove the spring 10 from the impeller 11
8. Remove the screws 3,5
9. Remove the motor 9.
HORNBACH Baumarkt AG
Hornbachstraße 11
76879 Bornheim / Germany
Fan 2.0 100_D_EN_V1.0_2019-08
2
3
5
4
. Remove
.
.
www.hornbach.com
6
7
Dispose of the individual components according to the
applicable regulations!
Component
1 Front panel
2 Cover
3, 4, 5, 7 Screw
6 Terminal block
8 Fan housing
9 Motor
10 Impeller spring
11 Impeller
Tool
Screwdriver
Cross-tip screwdriver
Pliers
10
9
8
Material
ABS
ABS
Steel
ABS, copper
ABS
Steel, copper, others
Steel
ABS
11