Product Usage; Before First Use; Use - Edenwood 972157 Consignes D'utilisation

B

Product usage

Before first use
• Clean the unit ( Cleaning and maintenance).

Use

To assemble
Attach the hanging hook (not included) to the light-mounting base.
Hang the hook with the light fixed to the base, then secure the hook in place with a suitable
screw and nut (not included).
The user should use a safety cable when installing the light's housing to avoid the risk
of dropping the unit. The safety cable's technical specifications are as follows: 2 mm.
No clips or safety cables are provided as accessories.
To adjust the beam angle: loosen the adjustment knob. Orient the light to the desired
angle. Tighten the knob to secure the product in place.
Note : The appropriate fastening systems vary according to the mounting surface's
composition.
WARNING!
• Always unplug the power plug from the mains socket
before assembling the product.
• Use a live wire detector to ensure that no electric cables
are running behind or through the surface.
Control panel
Item Function
Display Indicates the number of the selected mode
MENU Switches between different modes
UP Increases the values
DOWN Decreases the values
ENTER Confirms the settings
18 EN