Power On; Plug Into The Audio Device; Pairing; Volume Control - Cellink BTST-9000D Manuel D'utilisation

2 Power On

- Use the power switch to turn on the power

3 Plug into the audio device

- Plug the audio connector into the audio port of the audio device.
4

4 Pairing

- Press and hold the pairing wheel on the stereo headset for 6 seconds until the blue and red LEDs flash
alternately.
- Press and hold the control button on the stereo adapter for 6 seconds until the blue and red LEDs flash
alternately.

5 Volume Control

Vol+
- Use the volume buttons on the stereo headset to adjust volume.
Note:
Since output voltage of audio devices varies from one to another, for users to have best sound
quality, the stereo adapter offers users 2 volume modes, high volume mode and normal mode.
Vol-
5