Page 2
WARNING AVERTISSEMENT PRECAUCION • To avoid electric shock and equipment damage, disconnect any power supplies to the enclosure before installing the light. • The lighting package must be properly grounded. • The lighting package is not designed for use in hazardous or wet locations.
GENERAL SAFETY INFORMATION Route supply wires away from door hinge, sharp edges, etc. Keep lens in place to prevent accidental breakage of the LED lamp. L’INFORMATION GÉNÉRALE DE SÛRETÉ Conduisez les fils d’approvisionnement loin de la charnière de porte, des bords pointus, etc.. Gardez l’objectif en place pour empêcher la rupture accidentelle de la lampe LED.
Page 4
Wiring All wiring must comply with applicable national and local eletrical codes; all authorities have jurisdiction. Connect the LED fixture to a 24 VDC class 2 power supply. Power must be connected to switch end of light. In some cases it may be advantageous to connect wire leads to terminal block on lighting fixture before installing.