Wireless Lan Module (Option); Wireless Lan Module (Optional) - bto A Guide Utilisateur Concis

Wireless LAN Module (Option)

Make sure the Wireless LAN module is turned on (and not
in Airplane Mode).
WLAN Driver Installation
Follow the instructions below:
(Intel) WLAN/WLAN and Bluetooth Combo
1. Click Option Drivers (button).
2. Click 1.Install WLAN Driver > Yes.
3. Click Next > Next.
4. Click the button to accept the license and click Next.
5. Click Typical (buttom) or Custom (buttom).
6. Click Install > Finish.
(Third Party) WLAN 802.11b/g/n and Bluetooth 4.0
Combo
1. Click Option Drivers (button).
2. Click 1.Install WLAN Driver > Yes.
3. Click Next.
4. Click Finish to restart the computer.
(Third Party) WLAN 802.11a/b/g/n and Bluetooth 4.0
Combo
1. Click Option Drivers (button).
2. Click 1.Install WLAN Driver > Yes.
3. Click Next > Yes > Next.
4. Click Install > Yes to restart the computer.
30
WLAN Configuration in Windows
Make sure the Wireless LAN module is turned on (and not
in Airplane Mode) before configuration begins.
Desktop Mode
1. Switch to the Windows Desktop (click the Desktop item in the
Start screen or use the Windows Logo Key
bination).
2. Click the icon in the notification area of the taskbar.
3. A list of available access points will appear.
Or
Charms Bar
1. Go to the Charms Bar.
2. Select Settings and then click the Wi-Fi icon (it should read
Available under the icon and Airplane mode should be Off).
3. A list of available access points will appear.
4. Double-click an access point to connect to it (or click it and click
Connect).
5. Enter a network security key (password) if required, and click
Next.
6. You can choose to find other devices or not.
7. When you are connected to the network access point it will
display Connected.
8. Select any connected network and click Disconnect to
disconnect from a connected access point.
9. You can click the Airplane Mode button to turn the mode On or
Off.
10. Alternatively you can click the Wi-Fi button to turn just the Wi-Fi
On or Off.
+ D key com-