build HEAVYWEIGHT SINGLE SHEF Instructions D'assemblage page 2

Assemble shelf with 4 Assembly Brackets (A) and 8 Leg screws (C).
(D)
COMPLETE STEPS 1 AND 2 FROM THE HEAVYWEIGHT
WORKBENCH INSTRUCTIONS FIRST, IF INSTALLING WHILE
BUILDING A HEAVYWEIGHT WORKBENCH
IF INSTALLING ONTO EXISTING HEAVYWEIGHT WORKBENCH,
FOLLOW INSTRUCTIONS STARTING ON PAGE 4.
1
Determine desired shelf height.
Temporarily install 1 Surface screw (B) into each leg directly below the shelf top height,
leaving approximately 1/2" of the screw exposed. These screws will be removed in the next step.
(BOTTOM)
(TOP)
(E)
(E)
(OVERHEAD VIEW)
(SHOWN UPSIDE DOWN)
Watch how to assemble at buildheavyweight.com
(D)
OR
Shelf
top height
(A)
.
(SOLD SEPERATELY)
1/2"
(B)
(C)
2