Plugger Studio MUSB30-MIX Guide Rapide page 3

GB
The MUSB30-MIX is a high-class USB microphone, it provides great and rich sound in full range. It's for
professional recording as well as for gamers and daily vocal use. With integrated monitor mix control, you
can mix between the direct microphone signal (for example your voice) and the sound from your audio
recording software on your computer/device (the music that are singing along to). The headphone volume
control allows you to control the real-time monitoring volume freely.
Monitor Mix control
The MUSB30-MIX integrate the monitor mix control (the top knob) is used to mix in the headphone
between the direct microphone sound (your voice) and the sound from your audio recording software on
your computer/device. By turning the knob counter clockwise, you will hear more of the direct
microphone sound, and less of the sound coming from the computer / device. If you turn the knob
clockwise, you will hear more of the computer / device sound and less of the direct microphone sound.
We recommend always beginning with the knob in the center position. This will ensure that you are
hearing an equal balance of both direct sound and the computer / device sound enabling you to then
achieve an ideal balance between the sound.
Headphone volume control
The headphone volume control (bottom knob) allows you to control the volume of the play back through
the headphone connected to the microphone via the headphone jack on the MUSB30-MIX.
Specifications :
- Streaming microphone with headphone control
- Cardioid directivity
- Frequency response : 18Hz to 20KHz
- Sensitivity : -36dB +/-2dB à 1kHz
- Max SPL level 130dB
- Sampling rate 24bit/96kHz
- Plug & Play, no drivers needed
- Mac and Windows compatible
Package content :
- 1 x MUSB30-MIX microphone
- 1 x tripod stand
- 1 x USB cable 1.8m
3