XciteRC 17000750 Mode D'emploi page 12

Battery charging
•
supplied USB cable in a dry and well-ventilated room on a
fireproof base and under permanent supervision - risk of
EN
fire or explosion!
•
with more than 1A output current, this can damage the
battery - fire or explosion hazard!
• Turn the FPV Watch off. Connect the supplied USB cable
to a PC or USB power adapter (5 V DC output voltage)
and also to the FPV watch. Die Ladezeit beträgt ca. 120
Minuten.
• After charging, disconnect the USB cable from the FPV
watch.
5.8 GHz Frequency chart
Data in Mhz
12
Battery charging · 5.8 GHz frequency chart
WARNING: Charging may only be done with the
WARNING: do not use a USB mains power adapter
FPV-Watch