Carlson Pet Products SUPERWIDE 0470 Manuel Du Propriétaire page 6

STEP 3
Unscrew and remove the (2) locking knobs at
each end of the gate. Then, remove the vertical
metal pivot bars (2), the mounting brackets (4)
and the associated toothed disks and metal
receiving cup. All components on each end of
the gate that can be removed without the use
of tools should now be removed.
STEP 4
Join the free ends of the gate together to form a closed structure. Insert one of the previously
removed metal pivot bars through the opening created by joining the upper metal joints.
Guide the metal pivot bar downward into the circular housing on the lower metal joint.
6 ENGLISH