AquaScape 84031 Instructions D'installation

I N S T A L L A T I O N
POND AND LANDSCAPE
LED LIGHTS
Aquascape Pond and Landscape LED Lights are developed to provide
impressive lighting options for ponds, waterfalls, and landscapes. This
instruction manual will guide you through the proper installation of
Aquascape Pond and Landscape LED Lights as well as recommended
maintenance procedures to ensure long-term effectiveness.
1-Watt Spotlight
Item #84031
1-Watt Waterfall Light
Item #84032
3-Watt Spotlight
Item #84033
6-Watt Spotlight
Item #84034
5
TABLE OF CONTENTS
Introduction ................................................... 1
Contents ...................................................... 1
Required Products .......................................... 1
Recommended Products .................................... 1
Safety Information ............................................. 1
Specifications Chart ....................................... 2
Installation ...................................................... 2
General Maintenance ....................................... 3
Troubleshooting ................................................ 3
Replacement Parts .......................................... 3
Warranty Information ....................................... 3
☎
Contact Us
For more information about our company or products,
please visit our website at aquascapeinc.com or
call US (866) 877-6637 CAN (866) 766-3426.
☎ US (866) 877-6637 | ☎
I N S T R U C T I O N S
Contents - #84032
No. Description
1. 1-Watt Waterfall Light
2. Removable Stand
Contents - #84031, #84033, and #84034
No. Description
1. Spotlight
2. Removable Stand
3. Landscape Stake
Required Products
2

Recommended Products

B
A
3-Way Quick-Connect Splitter
2
(#98489)
2
B
A
25' Quick-Connect
2
Extension Cable
(#98998)
Safety Information
WARNING: It is
recommended whenever
working in or near water to
have all electrical devices plugged
into a ground fault interrupter (GFCI)
that has been installed by a licensed
electrician.
• To reduce the risk of electrical shock
or damage to the light, all wiring and
junction connections should be made
per local codes. Requirements may
vary depending on usage and location.
Find us on:
CAN (866) 766-3426 | aquascapeinc.com
12-Volt Transformer
2
1
B
B
A
6-Way Quick-Connect Splitter
A
1
(#84022)
2 2
1
B
B
A
A
25' 5-Outlet Quick-Connect
2
1
Extension Cable
(#84023)
2 1
NOTE: TITLE BLOCK TOLERANCE
NOT APPLICABLE
B B
A A
Quick-Connect Photocell with Timer
REV DESCRIPTION NAME DATE PROPRIETARY AND CONFIDENTIAL UNLESS OTHERWISE SPECIFIED: CREATED BY CREATED DATE TITLE:
EAK 1/15/19
THE INFORMATION CONTAINED IN PHOTOCELL W/ DIGITAL TIMER
DIMENSIONS ARE IN INCHES CHECKED BY CHECKED DATE
THIS DRAWING IS THE SOLE TOLERANCES:
PROPERTY OF AQUASCAPE INC. FRACTIONAL 1/16 DWG. NO.
ANY REPRODUCTION IN PART OR
ANGULAR: MACH 5 BEND 5 84039-LI-AP-MD-1
AS A WHOLE WITHOUT THE WRITTEN TWO PLACE DECIMAL .010
PERMISSION OF AQUASCAPE INC IS
1 THREE PLACE DECIMAL .005 SCALE: 1:4 SIZE A SHEET 1 OF 1
INITIAL RELEASE EAK 1/15/19 PROHIBITED. INTERPRET GEOMETRIC TOLERANCING PER: ANSI
(#84039)
2 1
• The power cable should be protected
at all times to avoid punctures, cuts,
bruises, and abrasion.
• Operating the light fixture outside of
the 9-15 volt operating range voids the
product warranty and may damage or
shorten the life of the LEDs.
IMPORTANT: Aquascape,
Inc. is not responsible for
losses, injury, or death
resulting from a failure to observe these
safety precautions, misuse or abuse of
pumps or equipment.
facebook.com/aquascapeinc
youtube.com/aquascape4
pinterest.com/aquascapeinc
instagram.com/aquascape_inc/
1
2
1
2
3
1
B
A
1 1
B
A
1