Uniteck UNIPOWER 200.12 DC Mode D'emploi page 12

WARNING AND PIECES OF ADVICE
TROUBLESHOOTING
Troubleshooting
Unipower does not deliver current
anymore
12
Causes
Overconsumption
Discharged battery.
Battery overvoltage
Thermal protection: the inner
temperature of the inverter is
above 45°C
Bad connection
The fuse on front or back face
melted.
Output short-circuit
.
WWW UNITECK
Remedies
Check that the power of the
connected device is compatible
with the power of the inverter or
if possible reduce the
consumption of the connected
devices.
Recharge your battery or replace
it, if it is defective
Check that the battery voltage is
compatible with the inverter.
Replace the battery if it is
defective.
Stop the consumer. Let the
inverter cool down and improve
the ventilation.
Control the inverter/battery
connection.
Replace the fuse by another
fuse of the same size.
Control the connections of your
devices to supply.
.
FR