Cleaning And Maintenance; Technical Data - Work Men WMPRT18-360BM Traduction Des Instructions D'origine

CLEANING AND MAINTENANCE

performing any work on
the equipment, pull the
Service
§ Only qualified specialist personnel and
original replacement parts should be used for
repairs. This will ensure that your device
remains safe.
Cleaning
§ Regularly clean the machine housing with a
soft cloth, preferably after each use. Keep the
ventilation slots free from dust and dirt. If the
dirt does not come off use a soft cloth
moistened with soapy water. Never use
solvents such as petrol, alcohol, ammonia
water, etc. These solvents may damage the
plastic parts.
Lubrication
The machine requires no additional lubrication.
Never use solvents such as
petrol, alcohol, ammonia
water, etc. These solvents
may damage the plastic parts.
33
Attention! Before
power plug.

TECHNICAL DATA

Voltage V
No load speed min-1
Chuck capacity mm
Drilling capacity
in steel mm
wood mm
Battery
Battery capacity mAh
Charging duration battery h
Charger output voltage
Charger input Voltage
Weight kg
Noise emission values measured according to
relevant standard.
Acoustic pressure level
LpA 65.4 dB (A) K = 3 dB(A)
Acoustic power level
LwA 76.4 dB(A) K = 3 dB(A)
The sound power pressure
may exceed 85 dB(A), in this
case individual hearing
protection must be worn.
Weighted root mean square acceleration
according to relevant standard. : 2.44m/s²
K= 1,5 m/s ²
The declared vibration total value
has been measured in accordance with a
standard test method and may be used for
comparing one tool with another that the
declared vibration total value may also be
used in a preliminary assessment of
exposure.
18
0-550
10
8
16
Ni-Cd
1200
3-5h
24V d.c.
230V~50Hz
1.6
ATTENTION !