Table des Matières
Publicité
3. Attach the antenna to the pole.
Note:
Ø 1.25" - 2.25" pole.
a. Insert the two M8 U Bolts into the Main Mounting Bracket of
the antenna.
b. Secure each M8 U Bolt with two M8 Serrated Flange Nuts.
c. Tighten all nuts to approximately 14 N-m (10 lb-ft) or less to
avoid deforming the pole.
The mounting assembly can accommodate a
Hardware Installation
5
Publicité
Table des Matières
