Télécharger Imprimer la page
Intermatic Flexi-Guard WP3100C Mode D'emploi
Intermatic Flexi-Guard WP3100C Mode D'emploi

Intermatic Flexi-Guard WP3100C Mode D'emploi

Publicité

Liens rapides

CUBIERTA DE PROFUNDIDAD ESTÁNDAR 69.85 mm
COUVERCLE DE PROFONDEUR RÉGULIÈRE 69,85 mm
WP3100C
In-Use Weatherproof Receptacle Cover
• Mounts Vertically or Horizontally w/Hidden Hinges
• Includes three patented rotating inserts
• GFCI
• Duplex
• Toggle/4 rounds 1 3/8", 1 5/8", 1 3/4", 2 1/8"
Protection for Single Gang Applications
Meets 2005 NEC 406.8 (B) code
"15 and 20 Amps, 125 and 250V receptacles
installed in wet locations shall have an
enclosure that is weatherproof whether or not
the attachment plug cap is inserted"
Cubierta protectora de receptáculo
contra la intemperie en uso
• Se instala en forma vertical u horizontal con bisagras
invisibles
• Incluye tres piezas giratorias patentadas
• GFCI (interruptor de circuito de falla a tierra)
• Doble
• Para interruptor de palanca/4 interruptores redondos
34.925 mm, 41.275 mm, 44.45 mm, 53.975 mm
Couvercle étanche pour prise active
• Montage vertical ou horizontal avec charnières
invisibles
• Comprend trois garnitures isolantes tournantes
brevetées
• Disjoncteur de fuite de terre
• Duplexe
• Bascule/4 à 34,925 mm, 41.275 mm,
44,45 mm ou 53,975 mm de diamètre
©2006 INTERMATIC, INC.
SPRING GROVE, IL 60081
Made in Mexico
WWW.INTERMATIC.COM
2
3/4"
PROFUNDIDAD 69.85 mm
PROFONDEUR 69,85 mm
16
Configurations, One Cover
Configuraciones, una cubierta
Configurations, un couvercle
156--00167
NEMA 3R
Insert Design US Patent
#5 280 135
Canadian Patent
#2 073 932
DEPTH

Publicité

loading

Sommaire des Matières pour Intermatic Flexi-Guard WP3100C

  • Page 1 • Bascule/4 à 34,925 mm, 41.275 mm, Configurations, un couvercle 44,45 mm ou 53,975 mm de diamètre 156--00167 NEMA 3R Insert Design US Patent ©2006 INTERMATIC, INC. #5 280 135 SPRING GROVE, IL 60081 Canadian Patent Made in Mexico #2 073 932...
  • Page 2 1-3/8", 1-5/8", Duplex GFCI 1-3/4", 2-1/8" Toggle Installation Instructions for WP3100C 1. For new construction, install device in approved junction box per device manufacturers instructions. 2. Configure WP3100 base by removing cord set ports as per diagram. (1) 3. Select proper device insert. If necessary, modify toggle/single receptacle insert for appropriate device.