Koolatron WC33 Mode D'emploi page 2

This thirtyfive-three wine cooler is designed to accept 25 oz liq. (750 ml) bottles up to 12.5" (315mm)
tall. The temperature settings are between 39°F and 64°F (4°C and 18°C). Temperature selection, °F or
°C, switchable.
1. glass door
2. shelf racks
3. control panel
4. base rack
5. leveling leg
SPECIFICATIONS
Power Requirements: AC 120V 60Hz 1.4A
Capacity: 33 x 750 ml (25.4 oz) bottles
Max. Temp.: 18°C +/- 3°C (64°F +/- 5°F) at 22°C (72°F) ambient air temp.
Min. Temp.: 4°C +/- 3°C (39°F +/- 5°F) at 22°C (72°F) ambient air temp.
Weight: 30.3 kgs / 66.8 lbs
FEATURES
2
- Household Use Only.
- This unit is an indoor appliance. DO NOT use OUTDOORS.
- There must be at least 5" (127 mm) clearance around the unit to ensure proper ventilation.
- Place unit on a flat surface, away from heat sources
- Do not use the appliance if the plug or cable is damaged. If the power cord is damaged and/or
is malfunctioning, please contact the manufacturer.
- Pull the plug out of the outlet to disconnect. DO NOT pull the cord.
- Do not touch the plug with wet hands.
- Never clean appliance parts with flammable fluids. Do not store or use gasoline or any other
flammable vapors and liquids in the vicinity of this or any other appliance. The fumes can create
a fire hazard or explosion.
- Unplug the appliance when not in use.
USE OF EXTENSION CORDS
Because of potential safety hazards under certain conditions, we strongly recommend against the use
ofan extension cord. However, if you must use an extension cord, it is absolutely necessary that it is
a UL listed (in the United States) or a CSA-listed (in Canada), 3-wire grounding type appliance extension
cord having a grounding type plug and outlet and that the electrical rating of the cord is 15 amperes
(minimum) and 120 volts.
INSTALLATION
• Choose a location where there is an electrical outlet within reach of the power cord. There must be
at least 5" (127 mm) clearance around the unit to ensure proper ventilation. Avoid locations in direct
sunlight, moist or extreme cold areas.
• Before connecting the appliance to the power source, let it stand upright for approximately 4 hours.
This will reduce the possibility of a malfunction in the cooling system from handling during
transportation.
• Clean the interior surface with lukewarm water using a soft cloth.
• The legs must be adjusted during installation in order to function properly. The leveling legs on the
front corners can be adjusted by turning clockwise to raise the appliance, and counter-clockwise to
lower it. Be sure to have the appliance sloped slightly backward to ensure that the door closes tightly.
• Before loading bottles, recommend to cool the unit to the setting temperature, and not to load many
bottles at the same time.
SAFETY
3