Technical Specifications - CLAS OE 0137 Mode D'emploi

OE 0137
SINGLE INDUCTION CHARGING BASE

TECHNICAL SPECIFICATIONS

• protection class III
• operating temperature -10°C ~ +40°C
• dimensions: 105x150mm
• input 5V/1A
• USB output 5V/5W
• equipped with a power indicator
• delivered with its USB/C charging cable
• net weight 190g
• standards : EN 62368-1 : 2014, A11 : 2017
Intended use:
The charger is only suitable for indoor charging applications.
1. Wear safety glasses
2. Before each charge, check the charger for damage. Never use the charger if you see any
damage.
3. Do not use the charger in explosive environments where fl ammable liquids, gases or dusts are
present. Risk of damage
4. Do not put the light beam directly into your eyes.
5. Keep out of reach of children.
6. Do not cover the light beam during use (risk of overheating)
7. Always fully charge the battery to prolong its life.
8. Charge the battery for at least 8 hours before fi rst use
9. Use the original charger.
10. Do not remove the charger when the main power cable is connected.
CLEANING
Do not use solvents, corrosive cleaners or other cleaning agents. Use ONLY a dry or slightly damp
cloth for cleaning.
RECYCLING
Dispose of electrical appliances in an environmentally friendly manner!
Do not dispose of electrical appliances with household waste.
In accordance with the European Directive 2012/19/EU on electrical and electronic equipment,
they must be collected separately and sent for recycling.
Please contact your local authorities to fi nd out about the disposal options for your old appliance.
SAFETY