Electric Lock
Type
Power On Power Off
Fail Safe
Lock
Open
Fail
Open
Lock
Secure
NOTE:
Please select the correct wiring based on different electric
*
strike/lock and the normal status of door.
*
Electric Magnetic Lock will work at Fail Safe mode ONLY.
Note:
1) Power PoE_SP1, PoE_SP2 with DC, the voltage range is 48V~57V,
no polarity.
2) Power with PoE the cable wiring:
• PoE_SP1, brown and brown/white binding
• PoE_SP2, blue and blue/white binding
3) DC Power could be correctly sourced from qualified PoE Injector.
This product is covered by one or more of the U.S. patents (and any foreign patent
counterparts thereto) identified at www.cmspatents.com.
~
9
GDS3702 Connection
GDS3712
Door
Normal
NC2
NO2
COM2
Status
■
■
Lock
■
■
Open
■
■
Lock
■
■
Open
~
ZH
注意事项
• 请不要拆卸或修改该设备
• 请严格按照要求提供所需电源
• 请不要在超出-30至60 摄氏度环境下使用该设备;
请不要在超出-35至60 摄氏度环境下保存该设备
如果温度低于 -30 摄氏度,设备将需要约3分钟预热才能启动和
•
运行。
• 请在相对湿度10-90%的非凝结环境下使用该设备
• 请严格按照手册说明安装该设备或请专业电工人员安装
包装清单
GDS3712 一台
四个橡胶密封圈
防拆螺丝 四颗
快速安装指南 一本
安装支架 一个
钻孔模板贴纸 一张
背板固定螺丝 六颗
支架固定螺丝及锚
件 六套
防拆六角扳手 一个
韦根电缆 一根
后盖框 一个
~
~
10