Declaration Of Conformity; How To Dismantle System 2200 - PR electronics 2284 Mode D'emploi

DECLARATION OF CONFORMITY

As manufacturer
PR electronics A/S
Lerbakken 10
DK-8410 Rønde
hereby declares that the following product:
Type: 2284
Name: Isolation amplifier
is in conformity with the following directives and standards:
The EMC Directive 2004/108/EC and later amendments
EN 61326-1
For specification of the acceptable EMC performance level, refer to the
electrical specifications for the module.
The Low Voltage Directive 2006/95/EC and later amendments
EN 61010-1
The CE mark for compliance with the Low Voltage Directive was affixed in the
year: 1997
Rønde, 7 October 2009
18
Kim Rasmussen
Manufacturer's signature

HOW TO DISMANTLE SYSTEM 2200

Picture 1:
The back panel of the module is
detached from the housing by way
of a screw-driver.
Picture 2:
After this, the back panel can be
pulled out together with the PCB,
but please notice the position of the
PCB as there is a number of dif-
ferent positions in the house. Do not
pull the wires unnecessarily, instead
pull the PCB.
Switches and jumpers can now be
moved.
When assembling the back plate
and housing, please make sure no
wires are stuck.
19