Table des Matières
Publicité
Les langues disponibles
Les langues disponibles
Remote Manual - DIY Heat Pump Series
Operation of buttons
1
ON/OFF
2
MODE
TEMP
3
FAN
4
SLEEP
TURBO
SELF
5
CLEAN
6
7
8
SILENCE
FP
9
TIMER
ON
10
TIMER
OFF
11
SWING DIRECT
12
13
LED
FOLLOW
ME
14
7
UP Button(
)
Push this button to increase the indoor
temperature setting in 1 F increments to 86 F.
DOWN Button(
Push this button to decrease the indoor
temperature setting in 1 F increments to 62 F.
NOTE：Temperature contol is not available
in Fan mode.
NOTE: Press and hold UP and DOWN buttons
together for 3 seconds will alternate the temper-
ature display between the C & F scale.
SILENCE/FP Button
8
Active/Disable SILENCE function. If pushing more
than 2 seconds, the 'FP' function will be activiated,
pushing more than 2 seconds again to disable.
When the Silence function is activated, the
compressor will operate at low frequency and the
indoor unit will bring faint breeze, which will reduce
the noise to the lowest level and create a quiet and
comfortable room for you. Due to low frequency
operation of compressor, it may result in
insufficient cooling and heating capacity.
The 'FP' function can only be activated during the
heating operation (only when the setting mode is
HEAT). The unit will operate at a setting
temperature of 46°F. The display window of indoor
unit will display 'FP'. Press the buttons of ON/OFF,
SLEEP, FP, MODE, FAN SPEED, UP or DOWN
while operating will cancel the 'FP' function.
9
TIMER ON Button
Press this button to initiate the auto-on
time sequence. Each press will increase
the auto-timed setting in 30 minutes
increments. When the setting time displays
10.0, each press will increase the auto-
timed setting 60 minutes increments.
To cancel the auto-timed program, simply
adjust the auto-on time to 0.0.
5
o
o
)
o
o
O
O
www.coastair-ac.com
Publicité
Table des Matières
