Publicité
800 W – 230V/50Hz or 110V/60Hz
INSTRUCTIONS
1. Use: Your Soldamatic is suitable for temperatures between -10º C and 45º C, with a
relative humidity of 45% to 95%.
2. Welding technical information:
Exterior Ø
(mm)
16
20
25
32
40
50
63
Note: The listed heating times should be increased by 50% for temperatures below 5º C.
Temperature regulator available (up to 300ºC)
The heating sockets are screwed to the head support with the supplied allen screws..
Fix the body to the base for heating operation.
Fijar los casquillos adecuados según el diámetro del tubo a soldar.
The red and green lights turn on automatically when the welder is plugged in (always
use an earthed power supply). Wait until the red light turns off to start any welding
process.
Keep the appliance away from water.
Avoid direct contact with hot parts of the device.
CHECKING
1. Before performing any welding operation, check parts compatibility.
2. Inspect pipe and parts.
3. For pipe cutting operations, always use specially designed plastic pipecutters. Unevenly
cut material will not provide a quality weld.
4. Do not turn the pipe or attached parts during the heating and welding process.
5. Welded piping should be tested against leakages before use.
SOLDAMATIC-800
Thickness
Socket heating
(mm)
2,7
3,4
4,2
5,4
6,7
8,4
10,5
Pipe heating
(s)
(s)
5
4
5
4
7
4
8
4
12
6
18
6
24
6
Pipe cooling
(mins)
3
3
3
4
4
5
6
Publicité
