Ametek Sorensen XEL Serie Mode D'emploi page 11

DIGITAL INTERFACES (XEL-P models only)
Full digital remote control facilities are available through the RS232, USB, LAN and GPIB (optional)
interfaces.
Voltage Setting:
Voltage Readback:
Current Setting and
Readback:
RS232:
GPIB (optional):
USB:
LAN:
Remote Command
Processing Time:
GENERAL
AC Input:
Power Consumption:
Operating Range:
Storage Range:
Environmental:
Cooling:
Safety:
EMC:
Size:
Weight:
Resolution 10mV, Accuracy ± (0·05% + 50mV)
Resolution 10mV, Accuracy ± (0·1% + 50mV)
Resolution 0.1mA; 0.01mA on 75mA range.
Accuracy ± (0·3% + 0·3mA) ± (0·3% + 0.03mA) on 75mA range.
Standard 9-pin D-connector. Baud rate 9600.
Conforming with IEEE488.1 and IEEE488.2
Standard USB 2.0 hardware connection. Operates as a virtual COM port.
Ethernet 100/10base-T hardware connection. LXI V1.2, Class C compliant.
Typically <25ms between receiving the command terminator for a step
voltage change at the instrument and the output voltage beginning to
change.
230V AC or 115V AC ± 10%, 50/60Hz. Installation Category II
280VA max
+5ºC to +40ºC, 20% to 80% RH
−40ºC to + 70ºC
Indoor use at altitudes up to 2000m, Pollution Degree 2.
Intelligent variable-speed low noise fan assists convection. Over-
temperature trip shuts down output if internal temperatures exceed
predetermined thresholds.
Complies with EN61010−1
Complies with EN61326
107mm x 131mm (¼ rack 3U) x 288mm L (XEL-P: 343mm L), excluding
feet, knobs and terminals.
4·5kg (XEL-P: 4.9kg).
7