1.3 Safety information
Danger!
Light from the LED light source
Risk of explosion in areas with highly flammable air conditions.
-> Do not operate the device in areas where there is a risk
of explosion.
Danger!
Electromagnetic disturbances
May induce malfunctions in pacemakers or other implanted
electronic devices.
-> Do not use the device in the vicinity of a pacemaker or any
other implanted electronic device.
Warning!
Light from the LED light source
– Do not look directly into the LED light source.
– Only use the device when the protective shield is attached
and functioning correctly.
– Always ensure the protective shield is attached correctly.
– Never point the beam of the LED light source directly at eyes.
– Always aim the beam directly at the polymerisation surface.
4
Warning!
Defective device
Risk of injury due to parts of the device not functioning correctly.
Check the following points before each use:
– The device and its components are in good working order.
– The protective shield is attached correctly.
– The ventilation slots are not obstructed.
Caution!
Exposure of the device to water
Damage to the device due to water exposure.
– Do not hold the device under running water or immerse it
in water.
– Keep the device out of the reach of children.
– Only use genuine accessories supplied by the manufacturer.
– In the event of malfunction, request assistance from an
authorised customer support service or from Invicon chemical
solutions immediately.