Oregon Scientific Weather EM221 Mode D'emploi page 3

PAIRING WITH THE WEATHER
1. Make sure Bluetooth is turned on. Tap the app icon to open, it shows the Add Device screen.
Start Device Search to start searching. Press and hold the Weather
2. Tap
mode, the blue light flashes for approximately 30 seconds.
3. The searching screen displays eligible devices for pairing. You may also pull the screen downward to refresh.
Tap your desired Weather
Devices available for pairing list
under Eligible Devices section.
Devices that might have been paired
with the smart devices and are not
available for pairing list under the
Ineligible Devices section.
4. Tap the camera icon to choose your desired area. You may choose a photo from Photo Library, Take photo
using the camera, or Use Default Photo from the app. Then press OK to confirm and proceed.
5. Tap the device name to edit.
6. Tap > on the right to choose the room type, then press OK.
+
+
under the Eligible Devices, then tap OK to proceed.
+
for 2 seconds to enter the pairing
3