Commissioning And Operation; Cleaning And Care - Blumfeldt Strato Mode D'emploi

EN
18

COMMISSIONING AND OPERATION

• Place the unit upright on a level surface, at a safe distance from flammable
materials.
• Insert the plug into the power outlet.
• Turn the temperature control knob to MAX, the appliance heats at
maximum output.
• The fan starts as soon as you select one of the settings with the left-hand
control.
• As soon as the requested temperature in the room is reached, the heating
goes off, but the fan continues to run. As soon as the room temperature
drops again, the heating starts again. The fan and heater will now
alternately switch on and off to ensure a constant room temperature.
• Before pulling the plug, first turn the right-hand control to MIN and turn
the left-hand control to fan. Let the unit cool down for 2 minutes and then
switch it off. Then remove the plug from the power outlet.

CLEANING AND CARE

• Before cleaning the appliance, unplug the appliance from the power outlet
and leave it
• Cool down the unit. The housing is very susceptible to dust. Wipe it with
a warm, damp cloth and a little washing-up liquid. Then wipe with a dry
cloth. Make sure that no water enters the appliance. Never pour water
over the appliance or clean it with solvents or petrol.
• Clean the power cord and plug. Then pack the appliance in a plastic bag
before stowing it away.
• Allow the appliance to cool down before storing. Store the appliance in a
clean, well-ventilated place.