Charging The Batteries; Exchanging The Batteries; Optional Accessories - Euromex EduBlue Série Manuel D'utilisation

7.3 Charging the batteries

At first use, the batteries should be charged. Connect the cable of the charger to the inlet at the
back side of the microscope base, and connect the charger to the mains supply. The first charging
will take about 20 hours to reach full capacity.

7.4 Exchanging the batteries

Caution: Always remove the power adapter from the mains supply
before changing the bulb!
• Remove the battery compartment cover from the bottom plate.
• Replace the 3 batteries (AA type) in the correct order and place the battery cover back again.

8.0 Optional accessories

ED.6005 Pair HWF 5x/22 mm eyepieces
ED.6010 Pair HWF 10x/20 mm eyepieces
ED.6015 Pair HWF 15x/12 mm eyepieces
ED.6020 Pair HWF 20x/10 mm eyepieces
ED.6110 HWF 10x/20 mm eyepiece with micrometer reticle
ED.6099 Pair eyeshades
ED.9570 Pair object clamp for stage
ED.9950 Stage plate frosted glass, opaque, Ø 60 mm
ED.9956 Stage plate black/white, Ø 60 mm
AE.1112 Object micrometer 50 mm divided in 500 parts on glass slide 76 x 26 mm
7