Propex HS2211 Mode D'emploi page 5

with directional control and the rest are closable and are used in conjunction with the
appropriate sized plastic Y-branches. The heater is made from corrosion resistant materials
and sealed against the ingress of water, however suitable provision should be made to protect
the heater from direct road spray and debris.
Technical Specifications

Model: SH2211 Maximum dimensions: Height: 230mm, Width: 157mm, length:
430mm

Weight Under-floor Installation 7.7kg

Gas: Butane 28-30mbar - CAT I3+ (28-30/37), Butane/Propane 30mbar - CAT I3B/P
(30)

Propane 37mbar - CAT I3p (37)

Gas Consumption (M) 150g/h

Classification of Heater: Type: C53 (Fanned) Normal Installation

C13 Vehicle In Motion Installation

Nominal Heat Input: Gas 2.0Kw

Battery Supply

Nominal voltage: 12V d.c.

Operating range: 10.0V d.c. min. to 15V d.c. max.

Maximum current d.c. gas operation: 1.7 Amps (0.01Amps on standby)

Dry Storage Temperature: -20°C to 70°C

Hot Air Duct Diameter: 60mm ID

Flue Diameter: 22mm ID

Maximum Exhaust Flue Length: 2m

Minimum Exhaust Flue Length: 0.75m

Maximum Combustion Air Flue Length: 2m

Minimum Combustion Air Flue Length: 1.0m
SERIAL-Kombi, 80 route de Chambéry, 38420 Le Versoud France, 04 76 77 59 18
INFO_TEC_SERIAL-Kombi_HS2211_FR_GB V1.2 Janvier 2015
www.serial-kombi.com contact@serial-kombi.com