Create Two 'C' Shape Ends - Wild Hog LINX Instructions De Montage

STEP 1 LAY OUT THE PARTS FOR THE TOP
• 4 wood posts + 4 TriFits, laid out in a square shape.
•
Place flattened TriFit boxes between Linx parts and the ground to
protect all surfaces.
• Measure parallel posts to ensure equal lengths. Trim with saw as
necessary.
Top View
STEP 2

CREATE TWO 'C' SHAPE ENDS

•
Selecting 2 parallel posts, slide the TriFits on both ends of each
post. Do not use screw fasteners yet.
Top View
PAGE 1 | 7
| SIMPLIFIED PERGOLA SYSTEM | INSTALLATION GUIDE