Publicité
Before installing, operating or maintaining this device, follow carefully directions of this instruction manual.
SAFETY
•
Warnings and installation precautions
•
Never use the fixture in places with an ambient temperature of over 45° C (113° F), in wet places or subject to vibrations
or bumps;
•
Mount the projector so that it remains stable at all times;
•
Never let the power cord come into contact with other cables;
•
Handle the power cord and all connections with the mains with particular caution!
•
Do not insert objects into air vents.
•
Do not open the device and do not modify the device: Risk of electric shock!
•
Do not connect this device to a dimmer pack.
•
Do not switch the device on and off in short intervals, as this will reduce the device's life.
•
This device needs to connect the yellow/green conductor to earth. Never use anything to cover the ground contact.
•
Only operate the device after having familiarized with its functions.
•
Avoid flames and do not put close to flammable liquids or gases.
•
Always allow a free air space of at least 80 cm (30 in.) around the unit for ventilation.
•
Always disconnect power from the mains when device is not used or before cleaning!
•
Only handle the power cord holding it by the plug.
•
Make sure that the power cord is never crimped or damaged. Check the device and the power cord from time to time.
•
If device was dropped or struck, disconnect mains power supply immediately. Have a qualified engineer inspect for safety
before operating.
•
If the device has been exposed to drastic temperature fluctuation (e.g. after transportation), do not switch it on immedia-
tely. The arising condensation water might damage your device. Leave the device switched off until it has reached room
temperature.
•
If your device fails to work properly, discontinue the use immediately. Pack the unit securely (preferably in the original
packing material) and return it to your dealer for service.
•
For adult use only. The device must be installed beyond the reach of children.
•
Never leave the unit running unattended.
Regulations
The products referred in this manual complies with the Canadian, American and European Community directives and are there-fore mar-
ked with cMETus, CE, ROHS, R&TTE.
Recycling
If the unit is to be put out of operation definitively, take it to a local recycling plan for a disposal which is not harmful to the environment.
Cleaning
Regularly clean the lens with a clean microfiber cloth.
The use of compressed air facilitates the cleaning of the case.
Warranty applicable in Canada and United States
The manufacturer has designed and manufactured this product to give you complete satisfaction. Nevertheless, if it appears that your
product was defective, you benefit from a commercial guarantee of 24 months from the date of purchase. To benefit from this gua-
rantee, the user must return the product to the distributor, accompanied by the purchase invoice and by the serial number.
This warranty, applicable in America, covers all product defects that do not allow normal use of the product. It does not cover defects
related to poor maintenance, improper use, foreseeable wear or if the manufacturer's recommendations have not been followed. The
warranty does not cover normal wear and tear of parts related to the use of the product, such as battery, lamp, wheels, wear parts, etc.
Given the defect and the part concerned, the guarantor will then decide to proceed repair or replacement of said part.
The guarantor is: LEBLANC ILLUMINATIONS-CANADA Inc., 1733, rue Lepine, Joliette, (Quebec) J6E 4B7 Canada.
The period for supplying spare parts under warranty is two years. The commercial warranty provided above in no way limits the buyer's
right to use the provisions of the legal warranty in force in Canada or in United States
READ CAREFULLY THIS INSTRUCTION MANUAL
AND KEEP IT WITH CURE BEFORE CARRYING OUT ANY
OPERATIONS WITH THE UNIT, FOR FUTURE REFERENCE.
WARNING! RISK OF FIRE:
MAINTAIN A MINIMUM DISTANCE OF 1 M
BETWEEN THE BEAM AND A FLAMMABLE SURFACE.
Publicité
