Masterpro BGMP-9058 Manuel D'instructions page 3

Table des Matières

Publicité

Les langues disponibles
  • FR

Les langues disponibles

  • FRANÇAIS, page 5
EN
KITCHEN SCALE
MODEL: BGMP-9058
For the purpose of using and maintaining the kitchen scale, please read this instruction
completely before operating.
SPECIFICATIONS
● Equipped with a high precision "stain-gauge" sensor and high capability CPU to
ensure the weighing accuracy.
● Capacity:2g-5000g
● Tare function.
● Auto power off.
● Show low voltage
● White LED backlight
● Thermometer (c) and kitchen timer
● Clock
TECHNIC PARAMETER
1. Capacity:2g-5000g
2. Show numerical value: 1g
3. Battery: 3pcs AAA Batteries
4. Work temperature: 5℃-60℃
5. Bisplay usage: LCD Show, 4 units
KEY FUNCTION
key: Power on, Power off,
● TARE key: Tare function
● UNIT key: Unit exchange (g/lb/oz/kg)
● TIME key: Adjusting time
OPERATION
● Take out the scale, and open up the battery cover, install the batteries to the battery case.
● Put the scale on a flat table, and ensure it steady.
WEIGHTING STEP
① Under the state press the key of "
appeared on the display.
② Press the key of "UNIT", you can change "g", "oz", "kg", "lb".
" to power on, the scale will be zero "0"
03
③ Under the weight state, you could put the food on the metal directly., the weight will be
appeared on the display.
④ Or put the container on the metal, LCD will show the weight of container. Press the key
of "TARE", LCD shows zero. Clear the weight of the container, then put the food into
container, the weight will appear on the display.
⑤ Press the key of "ON/OFF" again, power off.
ADJUSTING CLOCK STEP
① Under power off state, press "Time" until the hour is shining.
② Press "Tare", to up the number or "Unit" to down the number.
③ Press "Time", minute will be shining
④ Press "Tare", to up the number or "Unit" to down the number.
⑸ Press "Time", adjusting is finished.
ERROR DISPLAY INTRODUCTION
● When the scale is over loaded, the "EEEE" will appear on the display.
● When the screen shows "
LO ", it means that the power isn't enough, please
change the batteries as soon as possible.
INTRODUCTION OF USING AND INSTALLING THE BATTERIES
● Use 3PCS AAA batteries. Please install it before using.
● When change the batteries, please open the battery cover on the back, put 3PCS AAA
batteries in the battery case (make the positive poles towards), then close the battery
cover tight.
ADVICE FOR USE AND CARE
● Put the scale on a clean and flat table.
The max. weight of the scale is 5000g, which included the weight before tare.
● To ensure the life of the scale, do not put the scale under wet, hot & cold condition.
● The product belongs to high precision electronic weighing apparatus, please do not press
or drop the scale otherwise the scale is easy to damage.
● If the scale surface is dirty, please clean the scale with soft cloth, neither use any chemi
cal detergent nor allow water to get inside the scale.
● The product is for small goods weighing only, do not use for legal trade.
● If the result appears improperly, please check about whether the batteries and the
touching point contact well. Replace for new batteries if used for a long time already,
then try again.
04
EN

Publicité

Table des Matières
loading

Table des Matières