Cleaning And Maintenance - cecotec SEALVAC 120 STEELCUT Manuel D'instructions

ENGLISH
Fig. 5
3. After vacuuming all the air out of the bag (its indicator light will switch off), the bag will
be sealed automatically (the Sealing button's indicator light will switch on). The Sealing
button's indicator light will flash when the sealing is complete.
Fig. 6
4. After sealing the bag (all the indicator lights should be off), open the cover by pressing the
tabs on both sides. Take out the bag.
Note: The sealing areas can get very hot when sealing. Do not touch them.
How to use Moist Food mode
Fig. 7
1. After placing moist foodstuff (beef, pork, chicken, etc.) inside a bag, place the bag in the
vacuum chamber and leave at least 8 cm between the content of the bag and the top of
the bag. More space will be needed for larger foodstuff.
Fig. 8
2. Push down both sides of the cover until you hear a locking sound. Press the Moist button
(its light indicator be switched on while the device is vacuuming the air out of the device).
Fig. 9
3. After vacuuming all the air out of the bag (its indicator light will switch off), the bag will
be sealed automatically (the Sealing button's indicator light will switch on). The Sealing
button's indicator light will flash when the sealing is complete.
4. After sealing the bag (all the indicator lights should be off), open the cover by pressing the
tabs on both sides. Take out the bag.
Note: The sealing areas can get very hot when sealing. Do not touch them.
How to seal bags without vacuuming the air
Fig. 10
1. Place the bag in the vacuum chamber and leave at least 8 cm between the content of the
bag and the top of the bag. More space will be needed for larger foodstuff.
Fig. 11
2. Press the "Sealing button". Its light indicator will switch on and will start flashing when the
sealing is completed.
Fig. 12
3. After sealing the bag (all the indicator lights should be off), open the cover by pressing the
tabs on both sides. Take out the bag.
Note: The sealing areas can get very hot when sealing. Do not touch them.
How to seal jars
Fig. 13
1. Insert one end of the vacuuming hose into the air-suction orifice and insert the other end
to the opening of the jar.
26 SEALVAC 120 STEELCUT
Fig. 14
2. Press the external-suction button in order to vacuum the air out of it. This function will be
completed when the sound stops. Stop the function manually just by pressing the button
again.
Note: The suction tube and the connectors are not included
How to seal zipper bags
Fig. 15
1. Insert one end of the vacuuming hose into the air-suction orifice and insert the other end
to the opening of the zipper bag
Fig. 16
2. Press the external-suction button in order to vacuum the air out of it. This function will be
completed when the sound stops. Stop the function manually just by pressing the button
again.
Note: The suction tube and the connectors are not included.
Note: After sealing 5 bags in a row, allow the device to cool down for about a minute.
The vacuum sealing or sealing process can be stopped and cancelled at any moment by
pressing the cancel button.
You may stop the sealing process by pressing the cancellation button.

3. CLEANING AND MAINTENANCE

Disconnect the appliance from the power supply and allow it to cool down before cleaning.
Use a soft, damp cloth to clean the product's surface.
Do not immerse the appliance in water or other liquid.
Do not use abrasive scouring pads, powders or cleaners.
ENGLISH
SEALVAC 120 STEELCUT 27