koban KMP-02 Mode D'emploi page 5

Liquid Crystal Display (LCD) and integrated circuit are used in this digital timer. The screen of the timer are large
display.multi-functions,easy to use,heavy loading,etc.
The digital timer display the present time accurately.It can control eight groups of ON/OFF switch,it can give a random
timing output when required.there are aslo many combinations,such as hourly,daily,weekly,group of the week,for the timer
on and off selection.
1. Setting of time
Before using the timer,present time must be set.
Press "CLOCK" and "HOUR" at the same time for setting the hour.
Press "CLOCK" and "MIN" at the same time for setting the minute.
Press "CLOCK" and "WEEK" at the same time for setting the week.
2. Setting of timer program
Press "PROG" to enter into the setting mode,The display shows "1ON"
Press"HOUR","MIN" and "WEEK" to set the hour and minute as well the day of the week for the timer ON.
Press"PROG" again for the setting the OFF time,the display shows "1OFF"
Repeat 2.2 for adjusting hour,minute and week.
Press"PROG" again to enter into the second ON/OFF mode.
Repeat 2.1 to 2.4 for setting the timer ON/OFF.
There are totally eight froups of timer setting.During time setting mode,press "R" for the cancelling the setting time.Press
the "R" again for the coming back to the previous setted time.
3. Combination weekly setting
During the timer ON/OFF setting mode,press"WEEK" once.The display will show Mo.,Tu.,We.,Th.,Fr.,Sa.,Su.,This
means it is a daily on/off setting.
Press"WEEK" again,the week day will show,set to the required week day,In this setting, the timer will only work in the
setted week day.
After the display showing Su,the next press will show Mo,Tu,We,Th,Fr,The timer gives the setting only for the
weorking day in the week.
Press "WEEK" again,the display will show Sa,Su.That means the timer gives the setting only in the week end and
Sunday.