Surface-Mounted Unit
(for Recessed and Semi-Recessed
units, see next page)
If necessary, shim at
anchor points to prevent
distortion of unit.
P20-138 Rev. C; ECM 11-15-025
© 2012 Bradley Corporation
Page 1 of 6
1/26/2012
Coordinate installation with architect and contractor to avoid protrusion from opposite
wall, pipes vent, conduits, electrical wiring etc. in wall. Follow all applicable local
building codes. If installing where unit projects above top of wainscot, provide
aluminum channel or other filler to prevent gap from finished wall and flange of unit.
For block walls, use metal expansion shields (not included).
Installation
Model 234
Towel Dispenser/Waste Receptacle
(4) Suitable wall anchors
(not included.)
P.O. Box 309, Menomonee Falls, WI 53052-0309
TEL. 800.BRADLEY (272.3539) FAX 262.251.5817
bradleycorp.com