Publicité
Les langues disponibles
Les langues disponibles
3.3
Supplied parts
•
Use & Maintenance Manual.
•
Hook with rubber rolls (24).
•
Shoulder strap (37).
•
Service tools bag.
•
Maintenance.
3.4
Recommended use
The tool has been designed and manufactured for harvesting in the indicated ways and with the specified operational lim-
its.
WARNING!
•
Any other use has to be considered inadequate and, therefore, potentially dangerous, so it voids the warranty.
•
Any other kind of use, differing from the ones mentioned above, may cause dangers to the tool and to other
things and injuries to people.
3.5
Specifications
•
Engine displacement: ..........................................................................52.5 cm3
•
Power: .................................................................................... 2.8 HP - 2.1 kW
•
Max rpm: ........................................................................................10500 ± 300
•
Electronic coil with rpm limiting device: ......................................................YES
•
Engine tank capacity: ........................................................................ 1400 cm3
•
Weight without extension pole............................................................. 13.50 kg
•
Overall dimensions (height - length - width): .................... 300 x 850 x 270 mm
3.6
Safety devices
•
Extension pole guard (19): Protects the operator from the movement of the extension pole.
•
Muffler guard (7): Protects the operator from burns.
3.7
Tool parts
Pos.
Denomination
Serial number plate
1
Engine starting lever
2
Internal-combustion engine
3
Clamp connection
4
Handgrip
5
Band
6
Muffler guard
7
Oil level indicator
8
Oil tap
9
Handgrip on/off switch
10
Filter plate
11
Accelerator lever
12
Hips protection
13
Engine tank
14
Tank plug
15
Tubular grip
16
Rubber-coated handgrip
17
Tool holder
18
Extension pole guard
19
Warning label
20
Lubrication holes
21
Hook
24
Extension pole handgrip
25
Extension pole
26
Page 22
Function
Indicates the identification details
Is pulled to start the engine up
Transmits motion to the tool
It connects the belt to the grip
Is fitted with the accelerator lever and the control switch
Joins the shoulder strap to the handgrip
Protects the operator from burns
Allows to check the oil quantity
Is used to fill the tank with oil
Is used to start or stop the engine
Shows when the filter is to be cleaned
Operates the tool
Protects the operator from the tool movements
Contains the fuel for the engine
Is used to fill up the tank and prevents fuel from coming out
Is used to hold the tool
Makes the tool easy to be handled
Holds the tool when it is not used
Protects the operator from the movement of the extension pole
Indicates the lubrication
They allow lubricating the guides
Is used to shake branches
Is used to handle the extension
Connects the tool with the hook
Use and Maintenance Manual – Original
Instructions Rev.: 04, Date 20/06/2018
Photo
A
A
A
A
A
B
A
A
A
A
B
B
B
B
B
B
B
B
B
C
D
I-L
I
I
Publicité
