Leica Geosystems GKL221 Mode D'emploi page 41

Inserting and removing
2.2
Warning
Start up
9
1 1
GKL221_005
Inserting
1. Insert the battery adapter along the rear
guiding edge.
2. Press on the front of the battery adapter until
it clicks and locks into place.
Connecting the Charger
Only use the charger in dry rooms! Never use the charger when it is wet or damp!
Always set the charger on a firm surface before starting it up.
Connect the charger either:
• With the supplied mains cable to the mains power socket or
• With the optional GDC211 vehicle adapter to the battery circuit of a vehicle
2
GKL221_006
Removing
1. Press on the front edge of the battery adapter
to open it.
2. Carefully lift it up to the stop point.
3. Remove the adapter by pulling it out forwards.
3
EN
2
1
Operation, GKL221