Publicité
Installation
1 Pull out the external power cable, BNC cable and communications
cable (for connecting to the "camera") through the rear of the Wall Mount
Adaptor into the Pipe.
Then, it is recommended to keep the cables in a distance of about 100
mm from the pipe.
2 Secure the Wall Mount Adaptor to the wall, corner or pole using the
"Anchor Bolts or Nuts (M10)".
When installing the product on a wall, mark and drill 4 holes into the
Wall Mount Adaptor and insert the Anchor Bolts or Nuts (M10) before
installation.
Anchor Bolts
Wall Mount Adaptor
3 Mount the Camera set on the Pipe.
Install the camera according to the camera's installation guide.
Camera set
Product Specifications
• Weight : 1650g
• Ciężar : 1650g
• Material : Aluminum
• Materiał : Aluminium
• Operation temp. : -50°C~60°C
• Temperatura robocza : -50°C~60°C
• Operation hum. : 0~100%
• Wilgotność robocza : 0~100%
• Poids : 1650g
• Ağırlık : 1650g
• Matériau : Aluminium
• Malzeme : Alüminyum
• Température de fonctionnement :
• Çalışma sıcaklığı : -50°C~60°C
-50°C~60°C
• Çalışma nem değeri : 0~100%
• Humidité de fonctionnement : 0~100%
• Gewicht : 1650g
• Hmotnost : 1650g
• Material : Aluminium
• Materiál : Hliník
• Betriebstemperatur : -50°C~60°C
• Provozní teplota : -50°C~60°C
• Betriebsluftfeuchte : 0~100%
• Provozní vlhkost : 0~100%
• Peso : 1650g
• 重量 : 1650g
• Material : Aluminio
• 材質 : アルミニウム
• Temp. funcionamiento : -50°C~60°C
• 動作温度 : -50°C~60°C
• Hum. funcionamiento. : 0~100%
• 動作湿度 : 0~100%
• Peso : 1650g
•
• Materiale : Alluminio
•
• Temperatura di esercizio : -50°C~60°C
•
• Umidità di esercizio : 0~100%
•
• Вес : 1650g
•
• Материал : Алюминий
•
• Температура при работе : -50°C~60°C
•
• Влажность при работе : 0~100%
•
Product Outline
: 1650g
:
: -50°C~60°C
: 0~100%
1650g
mm(inch)
PT01-005119B
Publicité
