Publicité
Les langues disponibles
Les langues disponibles
Removing the matrix/amplifier
1. Press the two release buttons down to stop.
2. Lift up the lower part of the matrix/amplifier and
take it off upwards.
Attention: In case the release buttons were pressed by error (the removal of matrix/amplifier is not intended),
the system is unlocked and needs be locked again by tilting and engaging.
Important note
Connecting the potential equalisation wire
Exerting too much pressure on the grounding wire screw during the connection procedure can damage the
rail support. Therefore, it is recommended to back up from behind the matrix/amplifier during the connection
work.
KATHREIN-Werke KG · Anton-Kathrein-Straße 1–3 · Postfach 10 04 44 · D-83004 Rosenheim · Deutschland · Telefon (0 80 31) 18 40 · Telefax (0 80 31) 18 43 06
Publicité
