Charging Function - NGS SKYDUSK Mode D'emploi

USER'S MANUAL
USB DRIVER AND SD CARD PLAYING
1. Turn on the tower speaker.
2. Put the USB driver into (10) USB slot, speaker will play the
music in the USB driver. If the tower speaker does not
enter USB, press the (3) M button to select the USB mode.
3. Put the SD card into (11) SD slot, speaker will play the music
in the SD card. If the tower speaker does not enter SD,
press the (3) M button to select the SD mode.

CHARGING FUNCTION

Connect the USB charging cable into the (13, 14) USB DC 5V
output port, the tower speaker can supply 5V 2A /1A current
for iPad or smart phone charging. And the iPad or smart
phone can be hold on tower speaker.
6
FM RADIO
1. Press the MODE button to select FM mode.
2. Then press and hold the button for 3 seconds to carry
out an automatic channel search.
3. Once the automatic search is completed, you can switch
between the saved stations by pressing the
button.
4. To carry out a manual channel search, press and hold the
or button for two seconds.
or