Quick Products Wheel Chock Guide Rapide

Includes:
• Wheel Chock
Safety & Use:
Never over-tighten wheel chocks. Over-tightening
chocks will damage both tires and chocks, and void
the warranty.
A locking chock is a stabilizing device, not a brake.
Use independent braking devices like blocks or
wedges.
Position the chocks between tandem wheels at the
wheel centerline. (See figure 1.)
Trailer make and model will determine how tight
chock must be to work well. You may find that a
lighter setting works best.
Proper chock performance depends on tire
performance. Check tire pressures and wear
frequently. Tires should be in good condition for safe
chock use.
Tip:
Run the new chock through its full movement range
until it operates smoothly.
Function:
By pressing a fixed distance outward against tandem
wheels, the tandem wheels are "locked" to each
other to create a stable base. The built-in scissors
mechanism allows an operator to create a great deal
of force between the wheels with little effort.
Initial Use:
1) The chock is shipped locked into its narrowest
position. Pull the unit wider. This will expose more
threads below the adjustment nut as the threaded
rod protrudes further.
2) Turn the nut clockwise. Note that this changes the
operating width.
3) Adjust the chock until it fits closely between the
wheels with the handle in the "open" position.
(See figure 2.) In the "open" position, the handle is
perpendicular to the wheel shoes.
Properly adjusted, swinging the handle to the
"closed" position parallel to wheel shoes will easily
tighten and secure the chock. (See figure 3.)
Installation/Operating Instructions
service@quickproducts1.com • quickproducts1.com
Wheel Chock™
Wheel Chock
JQ-CHOCKS
Fig. 1
Maintenance:
Use light lubricant on chock pivots.
Warranty:
Wheel Chock™ locking chocks are warranted for
consumer use for 1 year after the date of retail
purchase.
Wheel Chock™ locking chocks are warranted to
the original retail purchaser to be free from defects
in material and workmanship, ordinary wear and
tear expected. This warranty shall not apply to
any defects caused by: (I) overloading, (II) physical
abuse of goods or any acts of vandalism by any
person, (III) improper installation or use contrary
to the instructions, (IV) commercial use. The sole
remedy under this warranty is at the discretion
of manufacturer: the replacement of the same
or similar product, or the refund of the original
purchase price. Quick Products™ is not responsible
for any consequential or incidental damages. Any
and all freight charges to handle warranty claims
are the responsibility of the consumer. Quick
Products™ is not responsible for any labor charges
that may be incurred.
To submit a warranty claim please send your
name, mailing address, original retail sales
receipt, and summary of alleged defect to
quickproductswarranty@gmail.com
Adjustment Nut
Open Closed
Position Position
Fig. 2
Fig. 3
2552ex0216