Manuels Connexes pour Dictator FH550K
Sommaire des Matières pour Dictator FH550K
- Page 1 Mounting Instruction Bar Magnet Surface Mounting (aP) FH550K, part no. 040285SET AA01A1_FH550K www.dictator.com FH550K 01...
-
Page 2: Technical Data
1. TECHNICAL DATA FH550K (Surface mounting) Holding force 3700 N Operation mode quiescent current (locked with current) Supply voltage (+/-10 %) 12 / 24 V DC Power consumption 420 / 210 mA Hall contact changeover contact(s) (changeover/NO/NC) Switching voltage 30 V DC / 1 A respectively 125 V AC / 0.5 A... -
Page 3: Exploded View
Tiefe von 35mm thread insert up to a depth of Cut a M8 x 1.25 female von M8 x 1.25 schneiden. auf 12 mm erweitern. plate. 35 mm to 12 mm. thread. AA01A1_FH550K www.dictator.com FH550K 03... -
Page 4: Mounting Possibilities
4. Connect the power supply (de-energized) using the watertight IP42 cable bushing and energize. The part of the cable that is exposed outside the bar magnet must be mechanically protected (cable trough, cable sheath, cable protection, ...). FH550K 04 www.dictator.com AA01A1_FH550K... - Page 5 Kabel Ø 6-8mm L-Winkel IP42 L-angle Kabel Ø 6-8mm Z-Winkel L-Winkel Z-angle Z-Winkel Sturz Sturz Lintel Z-Winkel Sturz Gegenplatte Counter plate Gegenplatte Gegenplatte Flächenhaftmagnet Bar magnet Flächenhaftmagnet Flächenhaftmagnet Öffnungsrichtung Öffnungsrichtung Opening direction Türflügel Door leaf Öffnungsrichtung Türflügel Türflügel AA01A1_FH550K www.dictator.com FH550K 05...
-
Page 6: Electrical Connection
5. ELECTRICAL CONNECTION IMPORTANT: When using the magnets with the DICTATOR interlock control system, the supply voltage must always be set to 24 VDC - see illustration on the right!!! 12 VDC 24 VDC Both jumpers are used: A single jumper in the middle: FH550K 06 www.dictator.com... -
Page 7: Dimensions
6. DIMENSIONS AA01A1_FH550K www.dictator.com FH550K 07...