/Zenith wireless chime has different selectable tunes: Ding (one
Your Heath
®
note), Ding-Dong (two note), or Westminster (eight note) (Available on se-
lected Heath
/Zenith chimes). The factory setting is for the Ding-Dong tune
®
(or Westminster, when available). This tune can be changed by following the
instructions below.
• Ding (one note tune)
Transmitter: Add a jumper to location 8.
• Ding-Dong (two note tune)
Transmitter: Remove jumper from location 8.
Chime: Remove jumper from location 8.
• Westminster (Eight note tune) (Available on selected Heath
chimes)
Transmitter: Remove jumper from location 8.
Chime: Add a jumper to location 8.
Note: All models have both front and back door tune capabilities. You may pur-
chase any Heath
Remove screw to
open access door
595-5345-07
Tune Settings
/Zenith wireless push button for a second entrance.
®
Back of
Chime
Tune Setting
(Not used on
all models)
Transmitter Battery Replacement
Install four alkaline AAA batteries. See
diagram inside push button for correct bat-
tery orientation.
Inside
Transmitter
Note: Some models might require
the use of tweezers to remove and
replace the jumpers.
-5-
®
* Code Settings
1-7 Must Match Both
Transmitter and Chime
Tune Setting
/Zenith