Power Fist 8463978 Manuel D'utilisateur page 6

V 2.9
OPERATION
Setting the spreader is made by pressing down on the calibration
indicator button and setting the desired number on the control cable
assembly on the handle assembly (2).
NOTE: Walking speed and terrain may vary, settings may need to be
adjusted depending on the user and the terrain.
To Open Squeeze the control lever
To Close Release the control lever fully
WARNING! Follow the product manufacturer's instructions.
MAINTENANCE
1. After each use, wash the unit thoroughly and wipe dry.
NOTE: Some materials can cause corrosion in to the metal parts, reducing the life
of the spreader.
2. Lubricate moving parts, including the slide plate, axle and the upright shaft.
STORAGE
If the spreader will be stored for a long period of time, wash the unit with water or cleaning solution and
wipe dry. Store unit in a cool, dry location out of the reach of children.
DISPOSING OF THE TOOL
If your unit has become damaged beyond repair, do not throw it out. Take it to the appropriate
recycling facility.
6
120 lb. Broadcast Spreader
For technical questions call: 1-800-665-8685
8463978
Fig.6