HP Autozubehor 28324 Mode D'emploi page 2

1. Inserting or replacing the batteries
Remove with a suitable screwdriver the three screws on the backside. Lift of the cover (he has 3 flaps,
which provided for the removal and placement of the cover ). The 3 Batteries (Micro AAA) insert or
replace (please take care of the polarity +/-) . Replace the housing cover (please note the Recesses /
Flaps). Please mind to the proper seating of the O-ring in the cover. This is important for the tightness
of the housing. The three slotted screws pleas tighten down evenly (please do not overwind!).
Now the warning light is operational.
2. Operation of the warning light
On the front of the lamp are two pressure switches.
The pressure switch with symbol switch the 4 white LEDs in the center of the housing on the duration
of light or flashlight function .
The pressure switch without symbol switch one after the 9 different red flashing LED functions of outer
circle:
 Rotation
 3-fold flash
 Change light
 SOS-Morse code
 Steady light strong
 Steady light low
 2 LED steady light
 4 LED steady light
 Off (to turn off the light, all functions has to be switched)
Batteries must not in the garbage!
Please dispose of used batteries at designated collection points.
CE
Does not replace prescribed by the Highway Code to hedge funds!
Not for use while driving!
Use at your own risk! For improper use, no liability is accepted!
Warranty
This unit is a guarantee in accordance with the statutory provisions of 24 months from date of invoice
date. As proof of the warranty claim is a copy of the invoice. Damage, the normal wear and tear,
overloading or improper treatment are result of, remain excluded from the warranty, also wear parts.
Complaints can only be recognized when the equipment is returned unopened and freight prepaid to the
supplier.
Instruction Manual
LED safety warning light
Art.-Nr. 28324
Hans Pfefferkorn Vertriebsgesellschaft mbH
Hamelner Str. 53
37619 Bodenwerder