Magic 100 CNT Mode D'emploi page 22

Import a new configuration:
This function allows you to download a new configuration («.gfc» file) into the charger via the USB key.
First, make sure that the"".gfc"" file corresponding to the new configuration is present on the USB key.
1
This file must not be located in a folder or subfolder of the USB stick.
2 Connect the USB stick to the charger.
3 Enter the "Import CONFIG" submenu
4 Select the file to download
5 Confirm the download of the file
6 The charger will then download the new configuration.
Export a configuration on a USB key:
This function allows you to save the current charger configuration («.gfc» file) to the USB stick.
1 Connect the USB stick to the charger.
2 Enter the "Export CONFIG" submenu
3 Confirm that the configuration has been saved.
The charger will then save its current configuration on the USB stick.
4
( file ""Config_file.gfc"").
Restore the previous configuration:
This function allows you to restore the second to last charger configuration in case of a problem or error with the last downloaded
configuration.
1 Enter the "Restore CONFIG" submenu
2 Confirm the restoration of the configuration.
3 The charger will then restore the penultimate configuration of the charger.
Export charging data on USB stick:
This function allows you to retrieve the charge history and data on a USB key, in order to be able to use them on a spreadsheet or
other.
1 Enter the "Export DATA" submenu
22 22
MAGIC CHARGER 100 CNT
EN
Import CONFIG
Select file
config.gfc
Continue?
Oui
Loading
Export CONFIG
Continue?
YES
Loading
Restore CONFIG
Continue?
YES
Loading
Export DATA