Table des Matières
Publicité
Les langues disponibles
Les langues disponibles
EN
10
Button
Function
(Continued from previous page)
•
After no button was pressed for 5 seconds, the
setting is saved and the display (D) switches to the
actual room humidity or goes off.
•
When a timer is set the appropriate timer indicator (C)
lights up.
NOTICE
settings.
NOTICE
Timer (I)
Both timer are counting on from the present time.
The first possible timer action will be implemented.
Thus, it is not possible to set both timer on the
same value.
Using the < > (J) buttons:
- The relative humidity value is inputted in increments
of 5.
< > (J)
- The timer can be set.
Press to switch the product on/off.
On/off (K)
Indicator
Description
Defrosting indicator: The product is defrosting its cooling
system.
Defrosting
(A)
Full indicator: The water tank (N) is full.
Full (B)
Operation (Functions)
NOTICE
The product does not operate, when the water tank (N)
is full or is not placed properly into the housing. In that case the
indicator (B) lights up, and the display (D) shows an error code.
Switching on/off
•
Connect the product to the a suitable socket outlet. The display (D)
and the
full indicator (B) shortly light up.
The product restarts with its previous
Both timer can be set simultaneously.
full
Publicité
Table des Matières
