ASROCK Z690 Taichi Mode D'emploi page 35

RGB LED Header
(4-pin RGB_LED1)
(see p.1, No. 31)
Addressable LED Headers
(3-pin ADDR_LED1)
(see p.1, No. 30)
(3-pin ADDR_LED2)
(see p.1, No. 7)
(3-pin ADDR_LED3)
(see p.1, No. 8)
1
+12V G R B
1
GND
DO_ADDR
VOUT
GND
DO_ADDR
VOUT
1
This RGB header is used to
connect RGB LED extension
cable which allow users to choose
from various LED lighting
effects.
Caution: Never install the
RGB LED cable in the wrong
orientation; otherwise, the cable
may be damaged.
*Please refer to page 47 for
further instructions on this
header.
These headers are used to connect
Addressable LED extension ca-
bles which allow users to choose
from various LED lighting
effects.
Caution: Never install the
Addressable LED cable in the
wrong orientation; otherwise,
the cable may be damaged.
*Please refer to page 48 for
further instructions on this
header.
Z690 Taichi
31