Canvas CLAREVIEW 088-2213-4 Mode D'emploi page 4

6 Model No. 088-2213-4
Step 1
Requires A, B, AA, BB
Place the table top (A) on a soft, flat surface. Line up the bolt holes on the
table top (A) with the corresponding bolt holes on the table leg (B). Insert
M6x15 combination bolt and washer (AA) and lightly tighten the bolts
using the hex key (BB). Do not completely tighten until all assembly is
completed. Repeat the above steps for the remaining table legs.
AA
NOTE: Do not
completely tighten.
A
Step 2
B, C, AA, BB
Requires
Line up the bolt holes on the table leg (B) with the corresponding bolt holes on
the table leg connector (C). Insert M6x15 combination bolt and washer (AA) and
lightly tighten the bolts using the hex key (BB). Do not completely tighten until
all assembly is completed. Repeat the above steps for the remaining table legs.
AA
NOTE: Do not
completely tighten.
Step 3
Requires
Ensure all bolts are securely tightened using the hex key (BB). Turn the table to the
upright position. Your table now is ready to use.
B
B
C
BB
7