ONKRON NP24 Mode D'emploi page 9

• A. Installation without spacers (flat back TVs).
• B. Installation with spacers (TVs with a rounded back panel or
integrated mounting holes).
Flat back TVs
(Spacers are not needed)
• Put VESA panel on the back of your TV to match holes. Put spacers (I)
between TV and the panel use suitable bolts E / F / G / H / M8x50 if
necessary. Or you can put spacers (I) with washers (D) between bolts
and the panel.
• Use a screwdriver.
VESA panel
Rounded back TVs
mounting holes
E/F/G/H/M8x50
D
I
VESA panel
Integrated
Cables
or
E/F/G/H/M8x50
D
I
9