Troubleshooting; Warranty Information - Alfa Pro QUATTRO PRO TOP Manuel De L'utilisateur

TROUBLESHOOTING

IF THE OVEN COOLS DOWN QUICKLY
- Check that no moisture or water has infiltrated the oven.
- It may be lit for the first time or after a long idle period.
- Avoid sudden short fires that do not warm the bottom of the oven.
- Check that the burner is operational and then close the counter.
IF THE OVEN DOESN'T COOK AS YOU WOULD LIKE
- Ensure the oven is at the right temperature.
- Fire with high vivid flames for 10 minutes.
- Ensure the oven maintains the desired temperature for the duration of the cooking time; use the counter
to adjust the heat intensity as well as the flame adjuster: open and close the counter to raise or lower the
temperature as necessary.
- Contact us directly for expert advice on the web site www.alfaprofessional.it
Alfa Pro is not responsible for veins, cracks, hairline cracks of the floor as they are an intrinsic characteristic of the
material.

WARRANTY INFORMATION

Alfa Pro ovens fully comply with the Italian and European proposed regulations.
The Quattro Pro Top oven is guaranteed for 2 (two) years; good maintenance and proper use can make sure that
the oven lasts much longer.
WRITE DOWN THE NUMBER OF PRODUCTION LOT ON THE PRODUCT IDENTIFICATION TAG
NOT GUARANTEED
The warranty does not apply in the following options:
1. If the oven is not properly used and installed as described in this manual.
2. If the oven has been tampered with either voluntarily or involuntarily in any way.
3. If the oven, for any cause, has been altered and is no longer in the condition detected at delivery of the prod-
uct.
4. If other combustibles have been used other than natural gas. Do not use liquid coal for barbecues, chemicals
products, or other fuel.
5. If the damage is the result of the use of chemicals inside or outside the oven.
6. Normal wear of the burner, thermometer, ignition, electrodes, ignition cable, gas hose and refractory stones.
7. The door is not covered by the guarantee.
8. The costs of mounting and transport in relation to the guarantee.
9. Damage caused by exceeding the temperature limit of 450°C /
10. If components not produced or recommended by Alfa Pro are used.
11. Damage to parts not functional and decorative that do not affect the normal use of the oven, including
scratches and colors differences.
We recommend the exclusive use of spare parts recommended by Alfa Pro.
PLEASE RETAIN YOUR SALES RECEIPT OR INVOICE
842°F.
EN
19